XGSM Iași — Service & Piese GSM

Test your phone

Testing the speaker, microphones, earpiece and vibration

You need no new app for the sound test: a voice memo checks the bottom microphone, a short video shot with each camera checks the top microphones, and a call held to your ear and then on speaker separates the earpiece from the loudspeaker. Samsung and Xiaomi also ship built-in test menus; on iPhone and Pixel the sound screens do the same job. Before any verdict, rule out the cheap causes: case, dust in the grilles, Bluetooth left connected.
Anyone can do it10 minAndroidSamsungXiaomiHuaweiMotorolaGoogle PixelOnePlusOppoiPhoneChecked: November 17, 2026

Short version

  • A phone has two sound outputs — the bottom loudspeaker and the earpiece — and two or three microphones; each is tested separately.
  • With nothing to install: a voice memo for the bottom mic, a video with each camera for the top mics, a call at the ear and on speaker for the earpiece and loudspeaker.
  • Factory tests: Samsung Members or *#0*#, the CIT menu on Xiaomi; on iPhone and Pixel you test from the ringtone and vibration screens.
  • A test failed once means nothing — repeat it without the case, with clean grilles and Bluetooth off.
  • Failed twice in a row points to the part — see the table below to know which one.

What you are actually testing

Inside any recent phone there are at least two sound outputs and two or three microphones, plus a vibration motor. Once you know which is which and what each does, the test result no longer vaguely says “no sound” — it tells you exactly which part is at fault.

3D phone. Highlighted parts: earpiece, loudspeaker, vibration motor.

The three parts in the test, highlighted: the earpiece at the top (the receiver), the main loudspeaker at the bottom and the vibration motor. On your phone their position differs slightly, but the job is the same.
  • The earpiece (receiver): the small speaker at the top, where you hold your ear during calls. On many models it also plays the second stereo channel for music and video.
  • The main loudspeaker: usually at the bottom, next to the charging port. It plays music, videos, alarms and the other person's voice when you use speakerphone.
  • The main microphone: a tiny hole at the bottom, near the port — it picks up your voice in calls held to the ear.
  • The top and rear microphones: cancel background noise, pick up your voice on speakerphone and record the stereo sound of your videos.
  • The vibration motor: a small weight or plate that produces the buzz you feel for calls, notifications and haptic taps.

Where each one sits differs from model to model — that is why the tests below do not depend on position: you speak toward one end of the phone or listen at the other, and the answer tells you what works.

First, rule out the cheap causes

A good share of the phones that “can't be heard” have nothing wrong with the speaker or the microphone. Before any test, go through this list — it takes two minutes and often saves you the trip to a repair shop:

0 of 8 done

Your phone
Earbuds in the next room

Connection: Your phone via Bluetooth → Earbuds in the next room.

When Bluetooth stays connected the sound goes to the earbuds — the speaker is not broken, it is politely silent.

Tip

Crackling or cut-outs only in one place, or only in some calls? The culprit can be the network, not the speaker — try again from a different location, and if you use Wi-Fi calling, turn it off once and redial on the mobile network (Samsung's own advice).

The tests using the apps you already have

Five tests, zero apps to install. Run them in a quiet room, holding the bare phone — a case or a finger over the pinhole muffles the mic at once. And repeat any doubtful result once before drawing conclusions.

  1. Play a loud sound

    Play a song or a video with the media volume at maximum and listen to the bottom speaker: it must sound clear, with no crackling, static or muffled voice. On phones with stereo sound the same track must also be heard from the top — the earpiece plays the second channel.

  2. Make a call, at the ear and on speaker

    Call someone and listen first at the ear, then switch to speakerphone. If the voice is clear on speaker or headphones but not at the ear — the earpiece is at fault. Also ask if you are heard well: with the phone at the ear, then on speaker — the answers separate the bottom mic from the top one.

  3. Record a voice memo

    Open the phone's recorder app (Voice Memos on iPhone, Recorder or similar on Android) and say a few words holding the phone normally, speaking toward the bottom. Play it back: your voice must come through clearly. Silence or a distant, drowned voice = the bottom microphone.

    On iPhone this is exactly the test Apple recommends for the bottom microphone.

    Recorder

    00:12

    Stop

    Phone screen: Recorder. 00:12 [Stop]

  4. Film with each camera

    Record a short clip with the rear camera while speaking toward the top of the phone, then one with the front camera. On playback you must hear yourself clearly in both — if not, one of the top microphones is blocked or faulty. On iPhone, Apple checks the same way the microphones used for speakerphone and video.

  5. Put the phone on vibrate

    Switch it to vibrate — on iPhone also via the Ring/Silent switch — then call it from another phone or send yourself a message. The buzz must be firm and steady. Weak, choppy or absent = the vibration motor or its settings, which are turned off separately (see the tabs below).

Note

All of this is also part of checking a used phone — if you are testing right before buying one, see the complete 15-minute checklist.

The makers' built-in test menus

The built-in tests give the same verdict — most useful when you want a second opinion or when checking a phone on the spot. Heads-up: the hardware test menus are often in English whatever the phone's language — that is normal.

The official route is Samsung Members → Diagnostics → Phone diagnostics → Test all. It checks everything in a row, or you stop it and pick Speaker only — the test plays a tune and asks if it sounded clear.

Samsung Members
Diagnostics
Support
Step 1
Diagnostics
Phone diagnostics
Error reports
Step 2
Phone diagnostics
Test all
Battery status
Touch screen
Sensors
Speaker
Camera
Step 3
Diagnostics › Phone diagnostics › Speaker

Menu path, screen by screen: 1. Samsung Members: Diagnostics ←; Support. 2. Diagnostics: Phone diagnostics ←; Error reports. 3. Phone diagnostics: Test all; Battery status; Touch screen; Sensors; Speaker ←; Camera

The same diagnostics also open from Settings → Device care → Diagnostics on Galaxy phones with Android 12 or newer (on some versions it's called Battery and device care).

Faster but rawer: *#0*# typed in Samsung's Phone app opens the hardware test menu — SPEAKER plays a tune on the loudspeaker, RECEIVER on the earpiece, VIBRATION runs the motor. The menu is always in English and looks slightly different on each model; every detail in the Samsung codes guide.

RECEIVER
VIBRATION
MEGA CAM
SENSOR
TOUCH
SPEAKER

Phone screen: RECEIVER, VIBRATION, MEGA CAM, SENSOR, TOUCH, SPEAKER

The buttons that matter here: SPEAKER, RECEIVER and VIBRATION — leave each test with Back.

Huawei, Honor, Motorola, OnePlus, Oppo and Realme each have their own test menus or diagnostics — each with its own route, described in the dedicated guide. If your menu looks different, write to us: see the end of the page.

What each result means

Each test targets a single part — so one result already points at the problem. Here is every verdict, translated:

The test, how you run it and which part is suspect if it fails
The testHow you run itIf it fails, suspect
Loudspeakera song or ringtone at full media volume; SPEAKER / Speaker testsilence or crackle → the bottom speaker; muffled only → a clogged grille or traces of liquid
Earpiecea call held to the ear; RECEIVER / Receiver testsilent at the ear but clear on speaker → the receiver or its grille
Bottom microphonea voice memo in the recorder appsilence or a distant voice → the microphone next to the port
Top microphonesa clip filmed with the rear camera, then the front oneweak or broken sound in only one clip → the top or rear mic
They can't hear you on speakera speakerphone callthe mic used on speakerphone (the top one) — or the network, if it happens in one place only
Vibrationa call or message on vibrate; VIBRATION / Vibration test / a haptic patternnothing or a faint buzz → the vibration motor or its settings
Several tests fail at onceany combination of the aboverarely a part — restart, try Safe mode, then the mainboard

A single app can't hear you? Then it is not the part but the permission: on iPhone Settings → Privacy & Security → Microphone, on Android Settings → Security & privacy → Privacy → Permission manager → Microphone — or, faster, Settings → Apps → the app → Permissions.

And crackling after water is not necessarily a defect: drops left in the speaker grille vibrate with the membrane and distort the sound — Xiaomi advises letting the phone dry completely (it mentions ~48 hours) before judging. Test only once it has dried.

When the test points at the part

A component that fails the same test twice — after cleaning, restarting and without the case — is almost certainly hardware. Speakers, microphones and the vibration motor are small parts joined to the board by flex cables or spring contacts, and all of them can be replaced. Drops and water hit the bottom ones first, because that is where dust and liquid gather.

Warning· After water or a drop

A speaker that suddenly went quiet can be a torn flex or an oxidised contact — do not open the phone at home, but write down exactly what happened and when. That information shortens the repair-shop diagnosis a lot.

Do

  • Repeat the failed test once more, with a clean phone and no case
  • Note which test failed and how (silence, crackle, faint) — it speeds up the diagnosis
  • Try in Safe mode if you suspect an app is holding the audio channel

Don't

  • Don't push a needle, pin or toothpick into the grilles — it punctures the speaker membrane
  • Don't blow compressed air point-blank — it drives dust and moisture deeper
  • Don't draw conclusions on a still-wet phone — let it dry and retest

The good news: the speaker, earpiece and motor are among the most affordable parts to swap — what each repair involves is in camera, speaker and microphone replacement. If you first want to rule out software causes — apps holding the audio channel or hidden settings — also go through the “can't hear on calls” guide. And if the test says it is the part, you will find us at service.

Frequently asked questions

How do I check if my phone's speaker is broken?
Play a song or tap a ringtone with the media volume at maximum — the sound must be clear, with no crackling. Then confirm with the maker's test: Samsung Members or *#0*# on Samsung, the CIT menu on Xiaomi. If it stays silent after cleaning the grille and a restart, it is most likely the part.
Why can't people hear me on calls?
Most often the bottom mic (calls held to the ear) or the top one (speakerphone). A voice memo tells you if the bottom mic works; if they can't hear you on speakerphone, check the top mic with a filmed clip. Also check that a case or a finger is not covering the pinhole.
How many microphones does my phone have?
Usually two or three: one at the bottom near the charging port for calls at the ear; one at the top for noise cancelling and speakerphone; on some models a third near the camera for video recording. The exact position differs from model to model.
My phone doesn't vibrate at all — what do I check?
First the settings, because vibration turns off separately: on iPhone, Haptics under Sounds & Haptics, plus Vibration under Accessibility → Touch; on Android, Vibrate for calls in the sound menu. If all are on and the factory menu test moves nothing, the vibration motor is faulty.
Can I clean the speaker with compressed air or a needle?
No — a needle punctures the membrane, and compressed air drives dust and moisture deeper. A soft, dry brush is the safe method (see the cleaning guide), and on some Xiaomi models the Clean speaker feature shakes dust out with a 30-second tone — but it will not fix caked dirt.
How do I check the sound on a used phone, on the spot?
Five minutes is enough: record a voice memo and play it, make a call at the ear and on speaker, film a few seconds with each camera and set the phone on vibrate. On Samsung and Xiaomi you can also run the test menu — a failed test is a solid argument when negotiating.

Does your phone look different, or is something missing here?

Menus and buttons differ from model to model and change with updates. If these steps do not match your phone or you cannot find what you need, tell us your model and what you see on the screen: we will answer you and update the guide.

Checked against

Found something that doesn't work?

Send us your test results — we'll tell you what the repair involves.