XGSM Iași — Service & Piese GSM

Dial codes

The Xiaomi, Redmi and POCO test menu (CIT): how to open it and what to check

Every Xiaomi, Redmi and POCO carries a factory hardware test menu inside — CIT. You get in by typing *#*#6484#*#* in the Phone app or by tapping Kernel version a few times in Settings. Below: which tests are worth running, how to read the results and where the menu can't help.
Needs care15 minXiaomiChecked: November 17, 2026

Short version

  • Type *#*#6484#*#* in the Phone app — the CIT menu opens on its own after the last #.
  • Or: Settings → About phone → Detailed info and specs, then tap Kernel version 4–5 times in a row (on MIUI the screen is usually called All specs).
  • The menu is in English and the list differs from model to model — that's normal.
  • You mark each test yourself: Pass or Fail; results collect in Test report.
  • Information-only codes: *#06# (IMEI), *#*#64663#*#* (also CIT), *#66*# and *#*#6485#*#* (battery data, on some models).

Two ways into the test menu

CIT is the component test program the phone leaves the production line with — Xiaomi officially calls it hardware detection. It checks the screen, the touch layer, the speakers, the microphones, the sensors, the cameras and the buttons one by one, and testing changes no settings. There are two doors into it and at least one works almost every time.

  1. Type the code in the Phone app

    Open the Phone app — the one you call from — and type *#*#6484#*#*. Don't press the call key: the menu appears on its own after the last #. On some models *#*#64663#*#* or *#66*# get you in as well.

    Phone keypad. Dial the code *#*#6484#*#*.

  2. Or go in through Settings, no code needed

    The route is Settings → About phone → Detailed info and specs. On MIUI the screen is usually called All specs — some builds show Detailed info and specs too — on older versions All parameters, and on some phones the Kernel version row sits directly on About phone.

  3. Tap Kernel version several times

    Tap the Kernel version row 4–5 times in a row, quickly. On many models a message counts down the remaining taps, then the CIT menu opens on its own.

    The exact number differs: Xiaomi documents 4 taps on some models (POCO M4 Pro, POCO X7 Pro) and 5 on others (Xiaomi 14T Pro, REDMI 13C).

    Detailed info and specs
    Baseband version
    Kernel version
    Build number
    Tap 4–5 times in a row

    Gesture on the phone screen: Tap 4–5 times in a row.

HyperOS 2
Settings
About phoneHyperOS and Android
Wi-Fi
Bluetooth
Display
Apps
Step 1
About phone
Detailed info and specs
Back up and restore
Factory reset
Step 2
Detailed info and specs
Model23090RA98G
Android version14
HyperOS versionOS2.0.x
Baseband version
Kernel version
Build number
Step 3
About phone › Detailed info and specs › Kernel version

Menu path, screen by screen: 1. Settings: About phone — HyperOS and Android ←; Wi-Fi; Bluetooth; Display; Apps. 2. About phone: Detailed info and specs ←; Back up and restore; Factory reset. 3. Detailed info and specs: Model — 23090RA98G; Android version — 14; HyperOS version — OS2.0.x; Baseband version; Kernel version ←; Build number

The Settings route into CIT on HyperOS: on MIUI the last screen is called All specs.

Tip

If one way fails, try the other: the Settings route works even where the dial codes are disabled on your software version.

What you find inside CIT

The menu is a numbered list of tests, always in English — it isn't translated because it's built for the production line and the service bench. The number and order of the tests differ from model to model (usually a few dozen entries). On recent versions you first get a few overview options: Automatic test (runs everything, one test after another), Single item test (pick the component yourself), Test report (saved results) and Device View (the parts inside the phone).

1.Check version info
2.Touch screen test
3.Display test
4.Key test
5.Vibration test
6.Speaker test
7.Receiver test
8.Mic test
9.Proximity sensor test
10.Charging test

Phone screen: Check version info, Touch screen test, Display test, Key test, Vibration test, Speaker test, Receiver test, Mic test, Proximity sensor test, Charging test

This is what the CIT test list looks like. It's always in English, and the exact names and order differ from model to model.

Each test asks you to do something — draw on the screen, listen for a sound, press a button — then you mark it yourself: Pass if it worked, Fail if it didn't. In the automatic run the marks chain together and the results stay saved in Test report, where you can re-read them anytime.

Device View is worth a look especially on a used phone: it shows the internal names of the parts inside (screen, cameras, battery and the rest), handy when comparing two units or checking what parts the seller's phone was built with.

The tests worth running

You don't have to run them all. On a phone you're buying used, or after a drop, these matter the most — the first column keeps the English names as they appear in the menu:

The testIt looks good whenIf it fails
Display test / LCDeach colour fills the whole screen evenlydots that won't colour → dead pixels or a faulty panel
Touch screen testthe lines you draw appear everywhere, unbrokenbroken lines or self-drawn streaks → the touch layer of the screen
Speaker testthe test tune plays clearly, without cracklesilence or distortion → the speaker
Receiver testsound comes clearly from the earpiece at the topsilence → the earpiece speaker
Mic test (Main / Top mic)it plays your recorded voice back clearlynothing on playback → the microphone
Vibration testthe phone vibrates steadily for the whole testnothing → the vibration motor
Key testevery physical button lights up its zonea button doesn't respond → the button or its cable
Proximity sensor and the other sensorsthe values change as you cover or tilt the phonefrozen values → the sensor
Camera (Back / Front)a clean live preview, no errorsblack screen or an error → the camera
Charging testwith the cable connected, it shows the phone chargingit can't see charging → the port or the charging circuit; on some models the test is absent

Two tests need a little setup: at Proximity sensor a value on screen has to change as you cover the sensor at the top of the phone with your palm — on many models it flips between 5 and 0; at Mic test you speak for a few seconds and the test plays it back. For the sensor tests, tilt the phone or cover it with your palm and watch whether the on-screen numbers move.

Tip

Repeat a failed test once before drawing conclusions — a missed tap or a wet finger can fake the result. If it fails the same way twice, the component is almost certainly at fault.

Note· How to leave the menu

Use the Back gesture or key, repeated until you're back on the normal screen — full-screen tests exit with Back as well. Nothing in CIT changes settings or deletes data: it only tests and saves the result.

Other codes that only show information

Besides CIT, a few codes open information screens without changing anything — you can type them safely. After the last #, the screen appears on its own.

*#06#Dial

The phone's IMEI and serial number

Works on: All phones
*#*#6484#*#*Dial

The CIT hardware test menu covered in this guide

Works on: Xiaomi, Redmi, POCO
*#*#64663#*#*Dial

The same test menu, through the alternate code

Works on: Some modelsWhere it doesn't work, try *#*#6484#*#*.
*#66*#Dial

Also enters hardware detection

Works on: Some modelsMissing on many newer models.
*#*#6485#*#*Dial

Technical battery data: voltage, cycles, capacity

Works on: Some Xiaomi modelsShows nothing on some models.
IMEI
IMEI 1: 86 **** **** **** *
IMEI 2: 86 **** **** **** *
SN: A1B2C3D4E5

Phone keypad. Dial the code *#06#. After dialling you see: IMEI. IMEI 1: 86 **** **** **** *. IMEI 2: 86 **** **** **** *. SN: A1B2C3D4E5

The IMEI window after *#06# — on dual-SIM phones you get one IMEI per slot.

Without any new code, CIT also gives you the phone's identity: the first item in the list, Check version info, shows the mainboard serial (FSN), the phone's serial (PHONE SN), both IMEIs, the system version (Build Number) and the kernel version — worth noting when you want to compare the handset with the numbers on its box.

Check version info
FSN10A1B2C3D4
PHONE SN12345/ABCDE
IMEI 186 **** **** **** *
IMEI 286 **** **** **** *
Build NumberOS2.0.x.x
Baseband Version
Kernel Version5.15.x
CPU ID

Phone screen: Check version info: FSN — 10A1B2C3D4; PHONE SN — 12345/ABCDE; IMEI 1 — 86 **** **** **** *; IMEI 2 — 86 **** **** **** *; Build Number — OS2.0.x.x; Baseband Version; Kernel Version — 5.15.x; CPU ID

The Check version info screen in CIT: serials, IMEIs and versions — all in English, like the rest of the menu.

Also in the information family is *#*#4636#*#*, Android's hidden testing menu: phone, signal and network data. It works on many Xiaomi phones, but the menu also holds options that change the network — read, don't change. We cover it separately in the *#*#4636#*#* menu guide.

Danger· Forum codes that promise a "reset"

Some codes found online erase everything the second you finish typing, with no warning — and so do the ones that change the region or rewrite the configuration. Don't type them: a proper reset is done in Settings, with its own warnings, and the codes in the table above cover everything you need to check.

The code does nothing?

You typed the code exactly and the phone stays silent? It's common and rarely your fault:

  • A different calling app. Codes reach the system through the Phone app the phone shipped with; from a dialer you installed yourself they may not fire at all.
  • Model or version. Some codes are missing on certain models or have been restricted on newer MIUI and HyperOS builds.
  • A missing sign. The stars and hash signs matter; a space or a wrong digit turns the code into an ordinary number.
  • A tablet without a SIM. No GSM modem means no dial pad — but the Settings route works there too.

The Settings route — About phone, then Kernel version tapped 4–5 times in a row — is the variant that works on almost any Xiaomi, Redmi or POCO, even with no SIM card inside.

Note

You'll see the same menu on a repair bench: it's the first thing a technician runs before opening a phone.

What the menu can't tell you

CIT answers "does the part work?", not every other question:

  • Battery wear. The battery test in CIT shows raw values — voltage, temperature, status — not a readable wear percentage. For that, see the battery health guide.
  • Original parts. Device View gives you the part names, not an "original" verdict — it helps with comparisons, not authentication.
  • Software problems. A crashing app or a flaky Bluetooth link can pass every test and still misbehave — CIT checks the part, not the app.
  • The part's future. Today's "Pass" guarantees nothing for a component that's dying slowly, like a worn battery.

For clear symptoms we have dedicated guides, so you know whether it's a settings job or a repair-shop job.

A test fails — what it means

Repeat the test once. Failed twice the same way means, almost certainly, a faulty part — not a setting you can fix yourself. By symptom, continue with the right guide:

Tip· Buying a used phone?

Run Automatic test face to face with the seller — in a few minutes you see the state of the screen, the cameras and the buttons. The rest of the checks are in the used-phone buying guide.

If a test fails consistently, that part needs replacing. At the repair shop we run the same menu on the bench and tell you exactly what failed; for an estimated cost you can ask for a quote first.

Frequently asked questions

The CIT menu is in English — is that normal?
Yes. CIT is built for the production line and the service bench, not for users, so it isn't translated. The tests work the same whatever the phone's language, and the colours, lines and numbers tell you the result without words.
Can I break anything by entering the test menu?
No — the tests only check components and change no settings, delete no data. One precaution: if an item is called "calibration" or asks you to change a value, leave it alone — that one modifies rather than tests.
I type *#*#6484#*#* and nothing happens. Why?
Check three things: you're typing in the phone's own Phone app, not another dialer; the code is written exactly, with every star and hash sign; and the software version may restrict some codes. The code-free variant — Kernel version tapped 4–5 times in About phone — opens the same menu.
How do I leave the CIT menu?
With the Back gesture or key, repeated until you're on the normal screen. From inside a test you exit with Back too, and if you're stuck, the Home button takes you out directly. The menu leaves nothing running behind.
Does the test menu tell me how worn my battery is?
Not directly. CIT's battery test shows technical values — voltage, temperature, status — not a readable wear percentage. For battery health and when a replacement is worth it, see the battery health guide.
Does the CIT menu work on POCO and Redmi, or only Xiaomi?
On all three — POCO and Redmi run the same MIUI or HyperOS, with the same test menu inside. The way in is identical; only the list and the test names differ from model to model.
A test came out FAIL — how bad is it?
Repeat it once first, to rule out a botched run. If it fails the same way, that component is most likely faulty: dead pixels, dead touch zones or silence in the speaker aren't fixed in settings. See the symptom guide or ask for a diagnosis.

Does your phone look different, or is something missing here?

Menus and buttons differ from model to model and change with updates. If these steps do not match your phone or you cannot find what you need, tell us your model and what you see on the screen: we will answer you and update the guide.

Checked against

A test keeps failing?

Bring the phone in for a diagnosis — we'll tell you on the spot which component is at fault and what the repair involves.