XGSM Iași — Service & Piese GSM

Special modes

iPhone recovery mode and DFU: when and how, for each model

A screen showing a cable pointing at a computer — or an Apple logo that won't go away — means your iPhone is waiting for help from a computer. Recovery mode lets Finder or the Apple Devices app reinstall iOS: first through an update that keeps your data, then, if needed, through a restore that erases everything.
Better in a service20 miniPhoneChecked: November 17, 2026

Short version

  • You need a Mac (Finder) or a PC (the Apple Devices app), a good USB cable and internet access. Entering recovery mode erases nothing.
  • iPhone 8 or later: press-release Volume up, then Volume down, then hold the side button. iPhone 7: side + Volume down. iPhone 6s / SE (1st gen): Home + side (or top).
  • Keep holding past the Apple logo, until the cable-and-computer screen appears.
  • On the computer, choose Update first — it reinstalls iOS and keeps your data. Restore erases everything.
  • DFU is the level below recovery: black screen, a full firmware rewrite, usually a repair-shop job.

What recovery mode is and what you need

Recovery mode is a repair mode: the phone boots a minimal system that never touches your data and only waits for a computer to reinstall iOS. Its screen is unmistakable — a cable pointing at a computer, and on recent versions the address support.apple.com/iphone/restore.

Apple recommends it in four situations: the Apple logo stays on screen for minutes with no progress bar, the computer doesn't recognise the phone or reports it as being in recovery mode, the “Connect to computer” screen appears on its own, or the phone keeps starting into Recovery Assistant — the feature that lets newer models try to repair themselves without a cable.

Tip

Before reaching for a cable, one computer-free attempt is worth it: if the phone is stuck only on the logo, a force restart can unfreeze it on the spot, without touching your data. Still won't start? Then move on to recovery.
  • A computer: an up-to-date Mac (everything happens in Finder) or a Windows PC with the latest Apple Devices app from the Microsoft Store. On older Windows, iTunes still works.
  • A USB cable that also carries data — your charging cable usually works; a charge-only cable won't let the computer see the phone at all.
  • Internet access — the computer downloads the firmware, several GB, before writing anything to the phone.
  • Time — Apple estimates up to 60 minutes for the whole process, download included.
The iPhone
The computer

Connection: The iPhone via data cable → The computer.

On iPhone 15 and newer it's USB-C; on older models, Lightning. What matters is that the cable carries data, not just power.

Warning· If the phone says “iPhone Unavailable”

After too many wrong passcodes, on iOS 15.2 or later an on-device reset option may appear on screen: Erase iPhone or, from iOS 17, Forgot Passcode? — it still erases everything, just without a computer. Details in the forgotten passcode guide; the computer route described below reaches the same result.

Entering recovery mode, by model

Order matters: first connect the phone to the computer and open the right app, only then do the button sequence. And the golden rule is not to stop at the Apple logo — keep the button held past it, until the cable screen appears.

  1. Connect the iPhone to the computer

    Plug the cable into the computer, then into the phone. Open Finder on a Mac or Apple Devices on a PC and leave it open — it takes over once the phone enters recovery mode. The sequence works whether the phone is stuck on the Apple logo or seems to be on normally.

  2. Do the sequence for your model

    The buttons differ between generations. Pick the right tab below and follow the drawings: each one shows exactly what to press and for how long.

  1. Volume up, Volume down, then hold the side button

    Press and quickly release Volume up, then Volume down. Then hold the side button — past the Apple logo if it appears — until the “Connect to computer” screen shows.

    Covers iPhone 8, X and every Face ID model, including SE (2nd–3rd generation). It also works with the phone powered off: keep the cable in the computer, connect it to the phone and hold the side button past the logo.

    1. 1Press and releaseVolume up
    2. 2Press and releaseVolume down
    3. 3Hold until the cable screenSide button12 s

    Press the phone's physical buttons in the numbered order. 1. Press and release (Volume up). 2. Press and release (Volume down). 3. Hold until the cable screen (Side button, 12 s)

support.apple.com/iphone/restore

Phone screen: Connect to computer. support.apple.com/iphone/restore

The right screen: a cable pointing at a computer and, on recent versions, the address at the top. If you only saw the logo and then a black screen, you didn't hold long enough — try again and keep holding.

Note· A button won't respond or is stuck?

Without the sequence there's no way into recovery mode — Apple itself says that means service. The steps up to the cable screen are nearly identical to a force restart, so you can first check whether the buttons respond at all.

Update or restore: the choice that matters

With the phone in recovery mode, the computer detects it and opens a window with two choices. They look harmless, but the difference is huge: one keeps everything, the other erases everything.

iPhone

There is a problem with the iPhone “iPhone” that requires it to be updated or restored.

CancelRestoreUpdate

Phone screen: iPhone. There is a problem with the iPhone “iPhone” that requires it to be updated or restored. [Cancel] [Restore] [Update]

The window appears on the computer screen, in Finder or Apple Devices. Always pick Update first.
The real difference between the two buttons
UpdateRestore
What it doesReinstalls iOS over the broken oneErases everything, then installs clean iOS
Photos and messagesStay on the phoneAre erased for good
When to pick itAlways the first tryWhen the update failed or isn't offered
At the endThe phone starts as beforeAsks for the Apple account it had

Danger· Before you press Restore

Restore permanently erases photos, messages and apps — there's no undo. If you have no backup and the data matters, don't restore yet: try Update first, and if it fails too and the phone is the only copy, ask about data recovery before you erase.
  1. Press Update first

    The computer downloads iOS and reinstalls it over the broken one, without touching your data. It's the option Apple recommends first, every time.

  2. Wait for the download and don't touch the cable

    The file is several GB, so it takes a while. If it goes past about 15 minutes, the phone may leave the cable screen on its own — that's normal. Let the download finish, redo the entry sequence and pick Update again.

  3. Only if it fails: Restore

    Restore erases the phone and installs clean iOS; afterwards you set it up from scratch or bring your data back from a backup. If it fails too or throws an error code, see the table below.

How to leave recovery without erasing anything

If you entered by accident or changed your mind, nothing has been erased — recovery mode itself never touches data. To leave, unplug the cable and force a restart, exactly like on a frozen iPhone.

  1. Unplug and hold the combo

    With the phone disconnected from the computer: press-release Volume up, then Volume down, then hold the side button until the Apple logo. On iPhone 7: side + Volume down. On iPhone 6s or older: the side (or top) button + Home button.

    It's exactly the force restart from the all-brands guide.

    1. 1Press and releaseVolume up
    2. 2Press and releaseVolume down
    3. 3Hold until the Apple logoSide button12 s

    Press the phone's physical buttons in the numbered order. 1. Press and release (Volume up). 2. Press and release (Volume down). 3. Hold until the Apple logo (Side button, 12 s)

Note

It starts and lands back on the cable screen? That's the sign the system can no longer boot on its own — stay in recovery and do the Update step above.

DFU, the level below recovery

DFU stands for Device Firmware Update — a deeper repair level than recovery mode. The phone doesn't load the system at all: the screen stays completely black, but the computer still sees it and can rewrite the firmware from scratch. It's used when recovery can't write the system, when the phone keeps returning to the cable screen, or when the problem sits at boot level.

The two levels side by side
Recovery modeDFU
What you see on screenA cable and a computerCompletely black
Can it keep data?Yes — through the Update optionNo — the rewrite erases everything
When it's usedStuck logo, cable screen, computer can't see itRecovery fails or loops
Who usually does itYou, at homeA technician

Something worth knowing: Apple does not publish a DFU button sequence for iPhone owners. In its documentation, firmware-level repair goes through the Apple Configurator app, with the Revive Device action for a device stuck in recovery — which tries to keep the data — or Restore, which erases it. That's why you won't find a made-up sequence here: if you've reached the point of needing DFU, a technician is the honest next step.

Warning

Every DFU rewrite erases the phone — there's no data-keeping DFU. And steer clear of shady “DFU tools” on random sites: stick to Finder, Apple Devices or Apple Configurator.

Error codes and when it's a service job

Sometimes the computer answers with “an unknown error occurred” and a number. The number tells you roughly where the problem is — Apple groups them like this:

How to read restore errors
ErrorWhat it usually meansWhat else to try
9, 4005, 4013, 4014the phone disconnected while writinga different cable, a different USB port, then Update again
13, 1600–1604, 1611, 1643–1650, 2000–2002, 2005, 2006, 2009a USB connection probleman original or Apple-certified cable, a port directly on the computer (not a keyboard or hub), another computer
17, 1638, 3000, 3002, 3004, 3013–3015, 3194, 3200the computer can't reach Apple's serversa different network; check your antivirus or firewall
4037the computer can't update a locked phoneunlock it with the passcode, then retry
1, 3, 11–13, 16, 20, 21, 23, 26–29, 34–37, 40, 56, 1002, 1004, 1011, 1012, 1014, 1667, 1669a possible hardware problem, per Appledon't keep retrying the restore — it's a service job

Danger· Hardware error + data with no copy

If the table points to a hardware error and the phone holds data with no backup, every new restore attempt risks erasing it. Stop and talk to a data recovery service first — something can only be saved while the phone hasn't been wiped.

There are two more situations where Apple sends you straight to service: you can't get either Update or Restore to work in recovery mode, or a button doesn't work so you can't enter it at all. In practice, both mean repair-shop work.

After the restore: the Apple account and your data

After a successful restore, the iPhone shows the “Hello” screen and starts setup like a new phone. If you have a backup in iCloud or on a computer, pick the backup restore at the transfer step — all the steps are in the iPhone backup guide.

Hello

Phone screen: Hello

The screen after a successful restore — setup starts here, with or without a backup.

One step catches many people: at the first start after an erase, the phone may ask for the Apple account and password it was set up with — that's Activation Lock, designed as theft protection. There is no way around it, not in a service, not with software. If it's your phone and you forgot the account password, you recover it on Apple's site, following the steps in the account guide.

Activation Lock
Apple ID or phone number
Next

Phone screen: Activation Lock [Next]

This is what the account prompt after an erase looks like: the phone wants the Apple account that was on it before the restore.

If you've been through every step and the iPhone still won't start, the problem is no longer software — request a quote or see how we work in service. And if it started but keeps freezing on the logo, also read the stuck-on-logo guide.

Frequently asked questions

Will I lose my photos if I put the iPhone in recovery mode?
No — entering recovery mode erases nothing; the cable screen only waits for a computer. You only lose data if you pick Restore on the computer, or if the update fails and you move on to restore. That's why Update is always the first choice.
What's the difference between recovery mode and DFU on iPhone?
Recovery mode boots a minimal system and shows the cable screen — it can reinstall iOS while keeping data, through the Update option. DFU is deeper: the screen stays black, the phone doesn't load the system at all, and every rewrite erases everything. In practice, DFU is the repair shop's tool.
How long does an iPhone restore or update take?
It depends mostly on the download: the firmware is several gigabytes, so on a typical connection the whole process takes between 15 and 60 minutes. Apple suggests allowing up to an hour. The actual writing to the phone is the shorter part.
The computer doesn't see my iPhone in recovery mode — why?
The three usual causes: the cable carries power but no data — swap it; the port can't cope — plug the cable straight into the computer, not a keyboard or hub; the app is old — update Apple Devices, iTunes or macOS. If it still fails, try a different computer.
The phone left the cable screen by itself during the download — is it broken?
No — Apple says that if the download takes more than about 15 minutes, the device can exit the recovery screen. Let the download finish, redo the button sequence and pick Update again.
After the restore it's asking for an Apple account I don't know — what do I do?
That's Activation Lock: after an erase, the iPhone asks for the Apple account and password it was set up with — a theft protection that can't be bypassed. If it's your phone, recover the account password on Apple's site; if you bought it second-hand, only the previous owner can remove it from their account.

Does your phone look different, or is something missing here?

Menus and buttons differ from model to model and change with updates. If these steps do not match your phone or you cannot find what you need, tell us your model and what you see on the screen: we will answer you and update the guide.

Checked against

Phone still not responding?

If no special mode helps, we check it on the bench and tell you what's wrong.