XGSM Iași — Service & Piese GSM

Connecting

USB stick, mouse, keyboard or hard disk on a phone (OTG)

Your phone can host a USB stick, a mouse or even a hard disk — the feature is called USB OTG and, with the right adapter, the drive shows up in the files app like a regular disk. Copying takes a few taps; on some brands you have to switch OTG on in settings first.
Anyone can do it10 minAndroidSamsungXiaomiHuaweiMotorolaGoogle PixelOnePlusOppoiPhoneChecked: November 17, 2026

Short version

  • For a stick with a regular USB-A plug you need an OTG adapter (USB-C→USB-A, or micro-USB on older phones); a USB-C stick goes straight in.
  • Copying happens in the files app: Files on Pixel, My Files on Samsung, Files on iPhone — the drive appears in the list on its own.
  • On Xiaomi, Oppo, Realme and OnePlus you first turn on the OTG switch in settings — it turns itself off after ~10 minutes without a device.
  • exFAT (or FAT32) is the safe format: Samsung officially asks for FAT32/exFAT, and NTFS is on almost nobody's official list — iPhone included.
  • A portable hard disk may need separate power — a USB hub with a charging port usually solves it.

What OTG is and what you need

OTG means USB On-The-Go: the phone stops being the accessory and becomes the host — the role a computer usually plays. Plug a small adapter into the charging port and you get a regular USB port that takes sticks, card readers, a mouse, a keyboard and other USB accessories.

The phone
OTG adapter
USB stick

Connection: The phone via into the charging port → OTG adapter. OTG adapter via USB-A → USB stick.

The basic chain: phone → OTG adapter → stick. A stick with a USB-C plug skips the adapter entirely.
  • The adapter that fits your port — USB-C→USB-A on recent phones, micro-USB→USB-A on older ones; a dual stick with a USB-C plug needs no adapter at all.
  • A drive in the right format — exFAT or FAT32 work almost everywhere; NTFS is a separate story, below.
  • An unlocked phone — locked, some phones ignore USB accessories; that's protection, not a fault.
  • Spare power for big accessories — a mechanical hard disk can ask for more than the port gives; a powered hub or an adapter with a charging port helps.

Tip· Check the phone's box first

Galaxy phones shipped for years with a USB-C→USB-A adapter in the box, meant for Smart Switch — you may already own one. Otherwise the adapter is cheap and sold in almost any phone shop.

OTG is not only for files: the same adapter carries a mouse and keyboard, an SD card reader or a whole hub — all through the charging port.

Copying files, by brand

Pick the tab for your brand — the differences are in the OTG switch and in the name of the files app. In short: on Samsung, Pixel, Motorola and Huawei the stick is detected straight away, while on Xiaomi, Oppo, Realme and OnePlus you turn the switch on in settings first.

  1. Connect the adapter and the stick

    The OTG adapter into the phone's port, the stick into the adapter; a USB-C stick goes straight into the port.

  2. Open My Files

    The app comes preinstalled. The stick appears at the very bottom, under Storage, as USB storage — tap it to see the folders.

    My Files
    Categories
    Images
    Videos
    Documents
    Storage
    Internal storage
    USB storage

    Phone screen: My Files: [Categories] Images; Videos; Documents; [Storage] Internal storage; USB storage ←

  3. Select the file

    Find the file or folder, touch and hold to select it, then tap Copy or Move.

  4. Pick the destination and confirm

    Go back to the storage list, open the target folder — on Internal storage or on the stick, depending on direction — and tap Move here (or Copy here if you chose to copy).

    The phone's photos live in DCIM → Camera. “Copy” leaves the original on the phone, “Move” removes it.

Copying works both ways everywhere — from the stick to the phone and from the phone to the stick — and the steps are identical for SD cards through a reader. On Huawei and Motorola the route is the Pixel one: connect, approve, copy in the files app.

Removing the stick safely

A copy doesn't finish instantly: part of the data goes through a buffer and is written in the background. Pull the stick mid-way and you risk a broken file — or a whole corrupted folder. The “remove” step tells the phone to finish its writes before you unplug.

  1. Pull down the notification panel

    Swipe down from the top edge — the USB drive notification sits there as long as it's connected.

    PhoneMessagesBrowserCamera
    Swipe down for notifications

    Gesture on the phone screen: Swipe down for notifications.

  2. Tap Eject

    In the drive's notification, tap Eject. On Samsung the action is called UNMOUNT — you find it in the notification, as an icon next to the drive in My Files, or in Settings → Battery and device care → Storage.

    On some Samsung models the menu keeps its old name, Device care.

  3. Wait for the confirmation

    The “safely removed” message — or the notification disappearing on its own — means you can pull the stick. On iPhone the step doesn't exist: pull the drive out of the port and you're done — still not mid-copy.

Warning· Unplug nothing during a copy

While the progress bar is running, pull neither the stick nor the adapter. On the next connect the phone may report the drive as having “problems” and ask to repair it.

Readable formats and big drives

A stick can be healthy and still invisible to the phone because of its format. In short: exFAT and FAT32 work almost everywhere; NTFS — the usual format of Windows disks — is on no official list, neither Apple's nor Samsung's, which explicitly asks for FAT32 or exFAT. FAT32 also has a practical limit: no file over 4 GB, so for long films pick exFAT.

What each one reads, per the official documentation
FormatAndroid (most)SamsungiPhone
FAT32YesYesYes
exFATYes, on recent modelsYesYes
NTFSDepends on the makerNot on the official listNot on the official list
APFS / HFS+NoNoYes

A stick is small and takes the power it needs from the phone without trouble. A mechanical hard disk is a different story: at spin-up it asks for a burst of current the phone's port can't always supply. Apple recommends a powered hub for iPhone — and on Lightning, the adapter with a charging port — while Huawei notes portable disks may not work at all through an OTG cable because of their power demands. A portable SSD asks for less and is the better candidate for a phone.

The phone
USB-C hub
Portable hard disk

Connection: The phone via hub with a power port → USB-C hub. USB-C hub via USB-A → Portable hard disk.

You can hear the disk spinning but the phone doesn't see it? It's most likely starved of current: run it through a powered hub — the charger plugs into the hub and the disk takes its power from there.

Warning· Reformatting erases everything

An NTFS stick the phone can't see is only “fixed” by formatting — and formatting wipes whatever is on it. Copy its contents to a computer first; on a USB-C iPhone you can format it right in Files (touch and hold the drive, then Erase), and on Samsung in Settings → Battery and device care → Storage — with the same data loss.

Mouse, keyboard and other accessories

A mouse or a keyboard needs no copying and no app: plug the accessory in and within seconds a cursor appears on screen. The OTG switch applies here too — on Xiaomi, Oppo, Realme and OnePlus you turn it on the same way as for a stick.

The phone
OTG adapter
Mouse or keyboard

Connection: The phone via into the charging port → OTG adapter. OTG adapter via USB-A → Mouse or keyboard.

A wired mouse is the safe pick; wireless kits with their own USB receiver usually work the same way.
  1. Connect the adapter to the phone

    And, where needed, turn on the OTG switch — on Xiaomi, Oppo, Realme and OnePlus it's the same one as for a stick.

  2. Plug in the mouse or keyboard

    Any wired mouse works, and so does a keyboard. The cursor appears with no approvals and no apps.

  3. Use them like on a computer

    Left click means tap, right click means back, the wheel scrolls; the keyboard types into any text field. On the lock screen you draw the pattern by holding the click down.

The case where this really saves the day: the picture is on screen but touch is dead. An OTG mouse does everything the finger did — unlocking, permissions, copying. The full route, including the black-screen variants, is in the guide for data off a broken screen.

On iPhone it's a different story: storage drives work as above, but a cursor only appears with AssistiveTouch on — you enable it in Settings → Accessibility → Touch, or by asking Siri to “turn on AssistiveTouch”.

Tip· OTG draws power from the battery

The stick, the mouse, the keyboard — all are powered by the phone. For long copies or a hub, keep it on the charger so you don't run dry mid-transfer.

When nothing works

The stick is in but the phone stays silent. The causes, in the order worth checking:

0 of 6 done

One UI 7
Settings
Sounds and vibration
Notifications
Security and privacy
Location
Step 1
Security and privacy
Auto Blocker
More security settings
Step 2
More security settings
SIM card lock
Block USB connections while locked
Step 3
Security and privacy › More security settings › Block USB connections while locked

Menu path, screen by screen: 1. Settings: Sounds and vibration; Notifications; Security and privacy ←; Location. 2. Security and privacy: Auto Blocker; More security settings ←. 3. More security settings: SIM card lock; Block USB connections while locked (on) ←

The option that stops USB data while the screen is locked — on by default on One UI 7. Auto Blocker, on the previous screen, stops commands over the USB cable.

Note· The decisive test

Another phone or another stick: what no phone can see is usually a dead accessory — and what sees no accessory is the port. If the port is full of lint, it can be cleaned; see how.

If the port is loose, the plug won't go all the way in or nothing helps, don't force it — it may be a hardware fault in the port, and that's a job for a repair shop.

Frequently asked questions

Does a regular USB stick work on a phone, or do I need a special one?
A regular USB-A stick works through an OTG adapter — USB-C→USB-A on recent phones, micro-USB→USB-A on older ones. There are also dual sticks with two plugs (USB-A and USB-C) that need nothing extra.
Why can't the phone see the stick?
The three usual causes: the OTG switch off (Xiaomi, Oppo, Realme, OnePlus — and it turns itself off after ~10 minutes), the NTFS format, or an adapter that carries power only. Rarer: the phone was locked when you connected, the locked-screen USB block or Auto Blocker on Samsung, or a drive asking for too much current.
What format should the stick be for a phone?
exFAT is the safe choice: Android, iPhone and computers all read it. FAT32 works too but holds no file over 4 GB. NTFS is on almost nobody's official list.
Can I connect an external hard disk to a phone?
Only if it gets enough current: some small disks work straight away, but most need a powered hub — Apple and Huawei say the same. A portable SSD usually draws less than a mechanical disk and stands a better chance.
Does anything get deleted from the phone when I plug a stick in?
No — connecting touches nothing, and reading or copying doesn't change the phone. The only action that erases is formatting, and you do it only if you ask for it, in the files app or in settings.
Can I use a mouse and keyboard on iPhone?
Depends on the accessory: storage drives work through an adapter, and a keyboard usually types fine on iPhone. For a cursor you need AssistiveTouch, an accessibility setting — on Android, by contrast, mouse and keyboard work straight away.
Does a USB hub work on a phone?
Yes — a powered hub is in fact the answer for big disks and for several accessories at once. Huawei does advise plugging in a single storage device at a time, though, because of identification conflicts.

Does your phone look different, or is something missing here?

Menus and buttons differ from model to model and change with updates. If these steps do not match your phone or you cannot find what you need, tell us your model and what you see on the screen: we will answer you and update the guide.

Checked against

Devices still won't pair?

It may be a hardware issue — the port, antenna or wireless module.